Ensuring that the PA is set up correctly is key to the smooth running of any session. Try following these steps if it is not working:

STEP 1: Check the speakers are on. Check that the Kettle lead is plugged into the back of the speaker and turn it on via the switch above. A green light will confirm the speaker is on.

STEP 2: Check the mixer is on. Look to see that the power lead is connected into the Mackie/Alto mixer and that the power is on at the mains. Green light will confirm when the mixer is on.

STEP 3: Check the speakers are connected, either directly into the mixing desk ‘Main Outs’ or are linked to the patches in the corners of the room.

STEP 4: Check the gain on the back of the speakers. Set the gain level on the back of the speaker to about 1 2o’clock and leave it at this set level (adjust future levels via the mixer).